C0376
- Chassis
- Generic (SAE)
Not urgent
Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
Front Axle Disconnect
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
The 4WD control module has detected a fault on the front axle disconnect actuator. On part-time AWD vehicles this actuator decouples the front axle for fuel saving, and a fault prevents engagement or disengagement of front-wheel drive.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
- Urgency
- Not urgent
- Will it pass emissions
- Not affected
- Check engine light
- Varies
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Many vehicles show no symptom at all beyond the warning light. The absence of a symptom does not mean the fault is not real.
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | Disconnect actuator failed (motor or solenoid) | Very common | — |
| 2 | Wiring or connector fault | Common | — |
| 3 | Axle position switch failed | Occasional | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- Front Axle Disconnect Actuator
- Awd Control Module
- Axle Position Switch
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.