C0903
- Chassis
- Generic (SAE)
Not urgent
Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
TPMS Sensor 2 Position Performance
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
The tire pressure monitoring receiver cannot reliably localize sensor 2 to a wheel position. Pressure values may be assigned to the wrong wheel until relearn is completed.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
- Urgency
- Not urgent
- Will it pass emissions
- Not affected
- Check engine light
- Varies
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Many vehicles show no symptom at all beyond the warning light. The absence of a symptom does not mean the fault is not real.
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | Position relearn required | Very common | — |
| 2 | Weak sensor signal at receiver | Common | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- TPMS Sensor
- TPMS Receiver
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.