P0105
- Powertrain
- Generic (SAE)
- Emissions
Diagnose soon
Usually safe to drive short distances, but the fault will not clear itself and can worsen or fail an emissions test.
Manifold Absolute Pressure / Barometric Pressure Circuit Malfunction
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
The ECU detects a general electrical malfunction in the manifold absolute pressure (MAP) or barometric pressure sensor circuit. Signal missing, implausible, or wiring broken. Generic fault when no more specific MAP code applies.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Usually safe to drive short distances, but the fault will not clear itself and can worsen or fail an emissions test.
- Urgency
- Diagnose soon
- Will it pass emissions
- No
- Check engine light
- Solid
- Clearing the light
- A completed drive cycle is normally required before the monitor re-runs and the light can clear.
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | MAP sensor failed | Very common | — |
| 2 | Vacuum hose to MAP sensor cracked or disconnected | Common | — |
| 3 | MAP wiring or connector fault | Common | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- MAP Sensor
- Barometric Pressure Sensor
- MAP Wiring
- Vacuum Hose
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.