P04B9
- Powertrain
- Generic (SAE)
Not urgent
Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
Fuel Fill Door Position Sensor Circuit Low
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
Same as P04B8 with the signal voltage below the plausible range. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
- Urgency
- Not urgent
- Will it pass emissions
- Not affected
- Check engine light
- Varies
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | Signal shorted to ground | Very common | — |
| 2 | Connector pins corroded - high contact resistance | Occasional | — |
| 3 | Harness chafing through insulation | Occasional | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- Fuel Fill Door Position Sensor
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.