P0A0D
- Powertrain
- Generic (SAE)
- Safety
Stop driving
Continuing to drive risks injury or major mechanical damage. Shut the engine off when it is safe to do so.
High Voltage System Interlock Circuit High
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
The HV interlock signal voltage is above threshold, indicating short to battery or unexpected continuity loss.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Continuing to drive risks injury or major mechanical damage. Shut the engine off when it is safe to do so.
- Urgency
- Stop driving
- Will it pass emissions
- Not affected
- Check engine light
- Solid
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | Short to battery on interlock | Very common | — |
| 2 | Connector pins corroded - high contact resistance | Occasional | — |
| 3 | Supply wire pinched against B+ source | Occasional | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- HV Interlock Loop
- HV Service Connector
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.