P250D
- Powertrain
- Manufacturer-specific
Not urgent
Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
Engine Oil Level Sensor Circuit High
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
The oil level sensor signal voltage reads above the upper limit, typically a short to reference voltage or an open signal return. Pegged at maximum, the ECM cannot distinguish full from invalid and disables the level monitor.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Unlikely to affect driveability. Worth resolving so the light does not mask a future fault.
- Urgency
- Not urgent
- Will it pass emissions
- Not affected
- Check engine light
- Varies
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | Signal wire shorted to reference voltage | Very common | — |
| 2 | Open signal return | Common | — |
| 3 | Connector pins corroded - high contact resistance | Occasional | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- Oil Level Sensor
- Sensor Wiring
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.