P2526
- Powertrain
- Manufacturer-specific
Diagnose soon
Usually safe to drive short distances, but the fault will not clear itself and can worsen or fail an emissions test.
Vacuum Reservoir Pressure Sensor Circuit Range/Performance
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
The vacuum reservoir pressure sensor is electrically intact, but the reading does not match the model — vacuum that does not build up after pump activation, does not bleed off when consumers draw, or stays at one value. Often a partly clogged hose, a leaking reservoir or an aged sensor.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Usually safe to drive short distances, but the fault will not clear itself and can worsen or fail an emissions test.
- Urgency
- Diagnose soon
- Will it pass emissions
- Not affected
- Check engine light
- Solid
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | Leaking reservoir or vacuum line | Very common | — |
| 2 | Aged sensor with offset drift | Common | — |
| 3 | Sensor element aged beyond calibration window | Occasional | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- Vacuum Reservoir
- Vacuum Lines
- Vacuum Pump
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.