U0317
- Network & Communication
- Generic (SAE)
- Safety
Stop driving
Continuing to drive risks injury or major mechanical damage. Shut the engine off when it is safe to do so.
Software Incompatibility with Brake System Control Module
This code is in our catalogue but has not yet been through editorial review, so the guidance below is limited to what our structured data supports. We publish deeper diagnostic content only after a code has been reviewed — here is why.
A control module has detected that its software version does not match the ABS/brake system module. Typically after a partial flash or fitting an unmatched ABS unit.
A trouble code records what a control module measured. It does not identify which part failed. Test before replacing anything.
- Safe to drive
- Continuing to drive risks injury or major mechanical damage. Shut the engine off when it is safe to do so.
- Urgency
- Stop driving
- Will it pass emissions
- Not affected
- Check engine light
- Solid
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Many vehicles show no symptom at all beyond the warning light. The absence of a symptom does not mean the fault is not real.
| # | Cause | How often | Component |
|---|---|---|---|
| 1 | ABS software/calibration mismatch | Very common | — |
| 2 | Used ABS module fitted from different vehicle | Common | — |
| 3 | Gateway module routing CAN messages incorrectly | Occasional | — |
Ordering reflects how often each cause is responsible in general, not a probability for your vehicle. Confirm by testing.
- ABS Control Module
- Control Module
- Definition
- Generic code set (SAE J2012 / ISO 15031-6) via the OBDexopen database, dedicated to the public domain under CC0-1.0.
- Diagnostic guidance
- Written and reviewed in-house. See our editorial policy.
- Review status
- Awaiting review
Found something wrong? Tell us — we publish corrections.